Peak Nano scales NanoPlex capacitor film 20-fold for fusion

Category: Drivers, Inertial, Lasers

Industrial film production line with metal rollers and a clear polymer film web, used for capacitor film production.
The new line adds up to 3 million pounds of annual capacity at full production.

Peak Nano estimates the new line could support about 25 new fusion machines a year at full production

(Image courtesy of Peak Nano)

TTI MarketEYE calls pulse-grade film capacitors the workhorse of pulsed-power fusion drivers and notes that a single pulsed-power fusion facility can require tens of thousands of capacitors. Peak Nano is now expanding production of its NanoPlex HDC capacitor film 20-fold at its Macedonia, Ohio, plant, and estimates the new line could support about 25 new fusion machines a year at full production, expected in the first quarter of 2028.

Fusion asks more of capacitor film

Shaun Walsh, Peak Nano’s chief marketing officer, told Fusion Future that fusion asks more of the capacitors in a driver’s power supply than earlier film materials can fully support, with higher shot rates, higher operating temperatures, greater ripple current handling and longer lifetimes all needed for cost-effective power. Dennis Zogbi of Paumanok, writing in TTI MarketEYE, says BOPP, the dominant capacitor dielectric, faces documented derating limits at commercial fusion shot rates, and that this limit is directly driving a wave of dielectric-materials innovation that includes NanoPlex.

A nanolayer capacitor film aimed at fusion derating limits

NanoPlex is a nanolayered polymer film that Peak Nano designed as a drop-in replacement for conventional capacitor film such as BOPP, and for the HDC grade Peak Nano claims up to four times the energy storage per unit volume of conventional film and more than twice as many pulse discharges as pulse-power capacitors built to the same capacitance and voltage ratings using other commercial polymer films. Customers can qualify the film on existing equipment with help from Peak Nano’s applications engineers, and the company produces each roll under ISO 9001 with in-line inspection and lot traceability. The technology grew out of nanolayer polymer research at Case Western Reserve University, with DARPA and the U.S. Naval Research Laboratory as development partners, and Peak Nano holds more than 20 global patents on it.

From testing to partnership

The film goes from the Macedonia line to capacitor makers, who build it into the capacitors in a fusion driver’s power supply. Developers that make their own capacitors have received film for testing too, as have capacitor makers such as E&P Technologies. Those developer programmes are under NDA, but Peak Nano says that over five years it has worked with multiple companies to jointly develop the film for laser-driven and magnetic fusion systems.

The E&P partnership, announced in March, centres on capacitors designed for fusion drivers and capable of million-shot duty cycles, against the tens of thousands of cycles TTI describes for today’s pulse-grade film capacitors. Together, the companies are co-developing high-energy-density capacitors for fusion drivers and related pulsed-power applications, pairing NanoPlex HDC film with E&P’s capacitor design and manufacturing expertise in work aimed at strengthening U.S. supply chains.

A Davis-Standard line aimed at fusion drivers

The Macedonia line is a Davis-Standard cast film system for mono-, multi- and nanolayered films, adding up to 3 million pounds of annual capacity at full production. Walsh said it concentrates on NanoPlex HDC film for laser-driven fusion and for systems built on impedance-matched Marx generators (IMGs), the pulsed-power architecture behind some inertial fusion designs. Vendors have indicated that new IMG-based machines could use between 20,000 and 100,000 capacitors each, depending on design, he said.

The added capacity follows TTI MarketEYE data showing average lead times across all capacitor technologies at 19 weeks in October 2025, 46% above the pre-pandemic level of 13 weeks. Davis-Standard’s Christian Renners calls the line the equipment maker’s first full-scale production line built for nanolayered films for dielectric applications. Peak Nano has run NanoPlex on an earlier Davis-Standard cast line since 2022, and the $20 million investment in equipment, facilities and staffing aims to take the film from early production to full commercial scale.

Beyond this line, Peak Nano plans further expansion in 2027, with space in its current facilities for two more lines as demand grows. The company is also recruiting, with more than 15 extrusion and inspection technician roles open across three shifts and a job fair at the Valley View site on November 21.

Domestic capacity for a fusion supply chain

Peak Nano is the only U.S. manufacturer of nanolayer dielectric film, and chief executive Jim Welsh says it has the technology and is now “building the capacity to let the world see it”, tying the expansion to Northeast Ohio’s polymer industry and to American-made film. Welsh has described capacitors as one of the critical components that will determine how fast the fusion industry can scale. Andrew Holland, chief executive of the Fusion Industry Association, said when the E&P partnership was announced that building resilient domestic capacity for critical components such as capacitors is essential if the United States is to lead in fusion energy.

Fusion companies face two challenges, Walsh said, completing commercially viable power systems and securing a supply chain that can support future production. Peak Nano’s HDC and LDF films also serve defence, motor starting, EVs and the power grid, along with AI data centres, a sector TTI names among the drivers of longer capacitor lead times, and that wider demand lets it build capacity in parallel with fusion machine development. TTI puts the question for 2027 and beyond as whether industry has enough capacity to meet rising fusion demand for polypropylene capacitor banks. Peak Nano’s goal, Walsh said, is to help ensure that when those new energy systems are ready, “the capacitor supply chain is ready too.”

To find out how Peak Nano may be able to help with your capacitor film requirements, visit the company profile.