First Light Fusion takes FLARE fast ignition to the Central Laser Facility
Category: Inertial, Lasers, Simulations


FLARE fast ignition pairs pulsed power compression with a separate rapid heating step that CLF will now model
(Image courtesy of First Light Fusion)
First Light Fusion has partnered with the Central Laser Facility on the second half of its FLARE concept, the ignition stage that follows its M3 compression experiments. The collaboration at Harwell applies the facility’s fast ignition modelling to FLARE fast ignition, with the aim of cutting the laser energy needed to start the burn without giving up the gain a power plant requires.
FLARE fast ignition after M3
FLARE splits fusion into two steps, compressing deuterium-tritium fuel to high density and then igniting it, and the new work with the Science and Technology Facilities Council’s Central Laser Facility (CLF) targets the second. First Light’s Chief Scientist, Dr Jonathan Skidmore, calls the first half validated, with the target itself creating the pressure history that assembles dense fuel from a relatively simple pulsed power driver. “The next phase is to rapidly heat that dense fuel,” he said.
That compression result came on M3, First Light’s in-house pulsed power facility, where multi-shell targets convert a relatively simple electrical pulse into a timed series of shock waves. The M3 experiments were not designed to show ignition or fusion gain, and First Light’s stated next steps include integrated experiments that pair compression with the rapid heating ignition needs. CLF Director Professor John Collier sees the partnership as applying the facility’s fast ignition modelling and experimental expertise to “a clearly defined system challenge.”
FLARE fast ignition modelling at Harwell
CLF scientists will model how a short, intense laser pulse generates and transports energetic electrons, and how efficiently those electrons deposit their energy in dense fuel. The programme will also explore engineered target structures and magnetic fields to guide the electrons into the ignition region. Based at Rutherford Appleton Laboratory, CLF lists high-power lasers, plasma modelling, target fabrication, diagnostics and engineering among its capabilities, along with extensive experience of fast ignition and energetic electron transport.
The cylindrical geometry behind FLARE fast ignition gives direct access to a large area of compressed fuel, which in First Light’s view opens up design parameters compared with standard laser fast ignition. The partners also aim to reduce further the laser energy that FLARE’s target concept already requires.
Ignition energy and fusion gain
The partners will assess physics alongside efficiency, cost, engineering and scalability rather than optimising the laser alone. Their central objective is to minimise the energy needed to start the burn while keeping the high fusion gain a practical power plant needs, since high gain lowers the repetition rate and eases demands on the driver, chamber and fuel delivery systems. First Light’s FLARE white paper puts the gain needed for commercially competitive fusion at 200 or more, and FLARE is designed for gains of up to 1,000.
Laser requirements in a year
The collaboration is already under way, and over the next year the aim is to help define the laser requirements for ignition through modelling. The FLARE white paper lists short-pulse laser ignition and target-based pulsed power ignition as its two candidate approaches, and the CLF programme concerns the laser requirements A high-gain demonstrator is mentioned as a possible later step.
Electron coupling into dense fuel sits at the centre of the FLARE fast ignition modelling, because it links the physics CLF will study to the laser energy First Light wants to bring down.
Stay ahead in the fusion revolution explore more breakthroughs from leading innovators in clean energy technology.